search

Bogen CA17 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non Bogen CA17. Bogen CA17 User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
The Bogen Model CA17 Call Switch is a momentary-push switch designed
for use with PI/SI35A Intercom Systems in conjunction with the SCR25A.
When pushed and released once, a signal is sent to the MCP35A via the
SCR25A call-in module to annunciate the call-in on the SBA225.The room
must be equipped with a 25-volt speaker.
The CA17 is designed for flush-mounting in a standard single-gang outlet
box; connections are made as illustrated in the figure below.
EMERGENCY CALL SWITCH Model CA17
Model CA17 Connecting Diagram
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com
Printed in U.S.A. 0301
© 2003 Bogen Communications, Inc.
54-5919-01R3
Specifications subject to change without notice.
From MCP35A +12V Terminal.
Connect only the +12V Terminal to this point.
Do not connect a ground lead to this point.
Use second pin to jump +12V DC
to additional SCR25A panels.
The Bogen Model CA17 Call Switch is a momentary-push switch designed
for use with PI/SI35A Intercom Systems in conjunction with the SCR25A.
When pushed and released once, a signal is sent to the MCP35A via the
SCR25A call-in module to annunciate the call-in on the SBA225.The room
must be equipped with a 25-volt speaker.
The CA17 is designed for flush-mounting in a standard single-gang outlet
box; connections are made as illustrated in the figure below.
EMERGENCY CALL SWITCH Model CA17
Model CA17 Connecting Diagram
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com
Printed in U.S.A. 0301
© 2003 Bogen Communications, Inc.
54-5919-01R3
Specifications subject to change without notice.
From MCP35A +12V Terminal.
Connect only the +12V Terminal to this point.
Do not connect a ground lead to this point.
Use second pin to jump +12V DC
to additional SCR25A panels.
Vue de la page 0
1

Résumé du contenu

Page 1 - Model CA17 Connecting Diagram

The Bogen Model CA17 Call Switch is a momentary-push switch designedfor use with PI/SI35A Intercom Systems in conjunction with the SCR25A.When pushed

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Non Bogen CA17
Non Bogen C10 Manuel d'utilisateur   (4 pages)
Non Bogen PRS48 Manuel d'utilisateur   (1 pages)
Non Bogen Communications Telephone Series TIS Manuel d'utilisateur   (8 pages)
Non Bogen Communications Telephone Accessories PCM-TIM Manuel d'utilisateur   (36 pages)
Non Bogen WMT-1A Manuel d'utilisateur   (4 pages)
Non Bogen Loudspeaker AE-5 Manuel d'utilisateur   (1 pages)
Non Bogen WMA80 Manuel d'utilisateur   (6 pages)
  • Star-water-systems Mighty Therm Dive Rite RadiSys Superior
  • Crosley Cuisiniers Sarlo Tondeuses à gazon Sonoro Radios Imation Lecteurs flash USB JBL Subwoofers pour voitures
  • Epson Perfection 1650 Scanner Yamaha NX-N500 Electrolux DF35X Canon DR-M1060 Mitel 5201
  • Volkswagen 2014 Beetle Manuel du propriétaire MTU 6R 1000 series Instructions d'exploitation Toshiba Satellite M60 Manuel de l'utilisateur Acer P1223 Manuel de l'utilisateur KitchenAid KMQCX 45600 Mode d'emploi